Towle WC

WC
Role	Amphibious aircraft
National origin	United States of America
Manufacturer	Towle Marine Aircraft Engineering Company
Designer	Thomas Towle
First flight	November 1928
Introduction	1928
Number built	2
Variants	Towle TA-2

The Towle WC, aka Towle TA-1, was a custom built aircraft for a 1929 round-the world flight.

Contents 1 Design and development 2 Operational history 3 Variants 4 Specifications (Towle WC) 5 References

Design and development

Thomas Towle was a engineer who had been involved with many early aircraft designs. Having just co-designed the Eastman-E2 Sea Rover, Towle was commissioned by Henry McCarroll to promote Detroit's aviation production capabilities.^[1]

The WC was a flying boat with an aluminum hull. The strut braced parasol wing was fabric covered.^{[2] [3]}

Operational history

The prototype WC flew as far as Brazil before engine reliability issues forced the cancellation of the round-the-world flight attempt.^[4]

Variants

• Towle TA-2 Was built as a successor to the WC model

Specifications (Towle WC)

Data from Flight

General characteristics

• Capacity: 4
• Length: 35 ft (11 m)
• Wingspan: 52 ft (16 m)
• Empty weight: 2,750 lb (1,247 kg)
• Gross weight: 4,420 lb (2,005 kg)
• Powerplant: 2 × Comet R-612 Seven cylinder radial, 150 hp (110 kW) each

Performance

• Maximum speed: 100 kn; 185 km/h (115 mph)
• Minimum control speed: 39 kn; 72 km/h (45 mph)

Aircraft of comparable role, configuration and era

• Fairchild FB-3
  

References

Towle Marine Aircraft Engineering Aircraft TA-2 · TA-3 · WC People Thomas Towle

Lists relating to aviation General Aircraft (manufacturers) Aircraft engines (manufacturers) Airlines (defunct) Airports Civil authorities Museums Registration prefixes Rotorcraft (manufacturers) Timeline Military Air forces Weapons Experimental Missiles Unmanned Accidents/incidents Commercial airliners (by location) Fatalities (by death toll) General aviation Military Records Airspeed Altitude Distance Endurance Firsts Most-produced aircraft